1/700 Scale WW2 German Army Waffenträger Auf. Pz. IV Tank Destroyer.
Contains 10 highly detailed tanks.
Contains:- 10x Waffenträger Auf. Pz. IV Tank Destroyers
Waffenträger Auf. Pz. IV Tank Destroyer
Tank destroyer developed in February 1944 on the basis of the PzIV tank. Development was discontinued in favor of a similar vehicle on the basis of the Krupp Waffentrager 12.8 cm PaK 44 of Czech origin. Existed only in blueprints. The Waffenträger auf Pz. IV vehicle was developed between the end of 1943 and the beginning of 1944. There were two variants planned, one with a 149mm sFH 18 howitzer and the second with a 128mm AT gun Kanone 81. The design was actually scrapped, because in early 1944, the developers started considering putting the guns on even lighter chassis (in this case modified 38t or even 38d) – and Panzer IV didn’t fit it. Another role was possibly played by the fact that by 1944, Panzer IV was already scheduled out of production. The Waffenträger auf Pz. IV never made it past the drawing boards.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation