CraftBerg
Contains:
1x Hexagon Airbrush tool
Description
Hexabrush is meant to create an inverted hexagon pattern using an airbrush to spray between the stems of the brush, in an downwards angle.
Measurements of pattern
The hexagon area is 3,43mm x 2,97mm
The hexagon lines (spacing between) are 0,3mm thick.
___________________________________________
Cleaning Information Steps
Parts might need to be cleaned extra when printed in Extreme quality frosted material.
1. Check for damage
2. Remove excess WAX residue from production process
with simple green and a soft brush with warm water.
3. Put the 3d printed product in sunlight to harden/cure for 2-3 hours.
Make sure its not too hot or the resin, or it might deform due to heat. under 30 degrees is fine.
4. Or check out in case of any issues: https://www.shapeways.com/blog/archives/22021-tips-n-tricks-for-painting-miniatures.html
Be sure to check out the other items in my store!
Buying helps me do this full-time! Support Craftberg!