Black PA12
Toyota Sera parcel shelf divider peg
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$16.94
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
There are 4 of these on the panel which slots in vertically behind the rear seat back rests. The originals are rivetted in place, and I would suggest the same method is done to attach these.
The peg is hollow and should accept a 4mm diameter x 25mm long section of metal - eg the thread of an M4 screw to give some strength. This could be glued in place with an epoxy based adhesive.
There is an expensive stainless steel option too.
3D model created by Andrew Cliffe, August 2022
The peg is hollow and should accept a 4mm diameter x 25mm long section of metal - eg the thread of an M4 screw to give some strength. This could be glued in place with an epoxy based adhesive.
There is an expensive stainless steel option too.
3D model created by Andrew Cliffe, August 2022
Details
What's in the box:
Toyota Sera parcel shelf divider peg
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
