1/700 Scale Modern Russian 9K35 Strela-10 (SA-13 Gopher) Surface to Air Missile Launcher.
Contains 10 highly detailed tanks.
Contains:- 10x 9K35 Strela-10 (SA-13 Gopher) Surface to Air Missile Launchers
9K35 Strela-10 (SA-13 Gopher) Surface to Air Missile Launcher
The
9K35 Strela-10 (
Russian: 9К35 «Стрела-10»; English:
arrow) is a highly mobile, visually aimed, optical/
infrared-guided, low-altitude, short-range
surface-to-air missile system. "9K35" is its
GRAU designation; its
NATO reporting name is
SA-13 "Gopher".The 9K35 is the successor of the
9K31 Strela-1 (SA-9 "Gaskin") and can also use the Strela-1's missiles in place of the 9M37.
Development of the 9K37 Strela-10SV system was initiated July 24, 1969. The decision to begin the development of a new non-all-weather system was taken despite the simultaneous development of an all-weather hybrid gun/missile system 9K22 "Tunguska" mainly as an economical measure. It was also seen as advantageous to have a system capable of fast reaction times and immunity to heavy radio-frequency jamming.
Rather than being mounted on an amphibious but lightly armoured
BRDM chassis like the 9K31, the 9K35 is mounted on a more mobile tracked, modified
MT-LB, with more room for equipment and missile reloads. Provision for amphibious capability is provided in some variants in the form of polyurethane-filled floats.
The Strela-10SV system and its 9M37 missile were tested in Donguzkom range from 1973 to 1974, but the results were disappointing: the system was found deficient in terms of missile probability of kill, vehicle reliability, among other things. Acceptance to service was thus delayed until May 16, 1976, by which time improvements had been introduced to the system.
Development of the system continued throughout the years through Strela-10M, -10M2 and -10M3 variants introducing among other things improved radio communications and provision for better integration to the Soviet integrated air defence system air picture data. Also improved missiles (9M37M and 9M333) have been developed and by September 2007 the 9K35M3-K Kolchan variant, mounted on a BTR-60 wheeled chassis, was displayed for the first time at the Moscow Air Show MAKS 2007.
The Russian Armed Forces will receive 72 advanced mobile “night” short-range anti-aircraft missile complexes “Strela-10M4″ by 2016. In 2014, the Russian Airborne Troops received the first batch of 18 “Strela-10M4″ vehicles. Modernization of equipment extends the “life” of an air defense system for 3–5 years.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation