Blue Processed Versatile Plastic
Locking Kinect mount with 25.4mm clamp
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$108.67
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a locking mount for a Kinect sensor designed to securely lock the sensor into place, while also still allowing the sensor to be easily detached.
It uses sliding lugs to securely latch the kinect sensor to the mount. These lugs are tightened and held in place with 20mm M3 bolts and embedded nuts.
There are three variants of the mount, with clamps for either an Arca style tripod mount, or the 19 or 25.4mm pole mounts with a 1/4" bolt (as used in camera equipment).
The pole mounts use M5 bolts.
The sensor mount also has two grooves under it, 10mm offset from the mount centre, designed to fit 30.0 x 2.0 x 1.2mm ridges as seen on the arca or pole clamps. They are there to prevent the clamp twisting on the mount. If you wish to design your own clamps, you may want to include these ridges to prevent loosening/twisting.
It uses sliding lugs to securely latch the kinect sensor to the mount. These lugs are tightened and held in place with 20mm M3 bolts and embedded nuts.
There are three variants of the mount, with clamps for either an Arca style tripod mount, or the 19 or 25.4mm pole mounts with a 1/4" bolt (as used in camera equipment).
The pole mounts use M5 bolts.
The sensor mount also has two grooves under it, 10mm offset from the mount centre, designed to fit 30.0 x 2.0 x 1.2mm ridges as seen on the arca or pole clamps. They are there to prevent the clamp twisting on the mount. If you wish to design your own clamps, you may want to include these ridges to prevent loosening/twisting.
Details
What's in the box:
Kinect mount 25.4mm for shapeways
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
