Original length: 282m (
memory-beta.wikia.com)
Scale: 1/2500
Print orientation for Detail Plastic: Top up
Mounting hole: Attached Hutet Class docking arms (one left, one right)
Cost reduction: Hollow, 2mm wall thickness. Three escape holes on the underside of each ship. The hollowing is less for cost reduction but to reduce the weight. The arms have pegs that should fit into the corresponding hole in the
1/2500 Hutet Class model in my shop. They must be glued together, some sanding might be required though. For assembly and the final look refer to the digital preview shown above.
Requested by: alsurfer34
This is the Cardassina Norin Class from the video game "Star Trek: Deep Space Nine - Dominion Wars". I added some more details to the original game model, roughly based on the original design sketch but i also took some liberties. In the game this ships were registered as class 2 vessels and could dock to the lower forward section of the Hutet Class. For that, i gave the ship a large docking port on each side of the main hull. They are supposed to be ligth tactical cruisers in the game. However, at the size of 282m given by memory-beta, they are almost as big as a Galor Class. The internal volume might even be more because the Norin's hull doesnt tapers as much to the aft as on the Galor.
Warning: This set requires the 1/2500 Hutet Class Model. The docking arms can not be removed. For a version without the arms see here.
If you need this in another material, size, or quantity, send me a message. I will try to make it as you need. Be sure to read
my comments below my shop page first.