Installed in a DaVinci 1.0a
XYZprinting Da Vinci Extruder Idler v02
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$34.90
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Extruder Idler wheel for XYZprinting Da Vinci 1.0a (or compatible) 3D printers.
This is NOT the drive gear attached to the feed motor.
Since the sintering process leaves a slight roughness, you will need to finish the hole with a 3mm(0.11811"), 1/8"(0.125"), or #32(0.116") drill bit.
*Note: For best results and longest life, the wheel/pin should be lubricated as part of machine maintenance
This is NOT the drive gear attached to the feed motor.
Since the sintering process leaves a slight roughness, you will need to finish the hole with a 3mm(0.11811"), 1/8"(0.125"), or #32(0.116") drill bit.
*Note: For best results and longest life, the wheel/pin should be lubricated as part of machine maintenance
Details
What's in the box:
Extruder_Idler_v02
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
