You must be logged in and verified to contact the designer.
Product Description
If you're running a Holmes BLE in your Capra, with our high clearance rear brace, this will let you mount the ESC directly to the brace and provide a little extra protection at the same time. Can be used on other rigs as well.
The inside of the cap sits just about flush with the heatsink but allows plenty of airflow over it.
You'll secure the top cap to the mount base with a couple zip ties. The base secures to the HC rear brace with 3 x counter sunk M3 screws. You could also mount it just about anywhere else you want using zome velcro, double sided tape, or drill a few holes to mount on something else.
This box DOES sit a few MM below the bottom of the HC rear brace. Its well above the ground and protected still but it was either down below or interfere with the interior cover...