You must be logged in and verified to contact the designer.
Product Description
High detailed 1/72 scale Torpedo Directors & Peloruses Set for USS destroyer and Cruisers.
The most destroyers are equipped with two torpedo directors, one on each side of the signal bridge.
The torpedo director together with the telescope is approximately 5 feet 6 inches high from the deck.
Set contains: four US Navy destroyer fittings - two Torpedo Directors and two closed Peloruses Used on: Fletcher Class Destroyer, German Destroyer Class
Real scaled from original Hollowed to saved material Model unpainted Set 4 Units
If you need a different size or a custom part designed just for you? Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: