D1 cross section profile with 3" feed slot, 17/32" wide (Track Depth = 9/16")
Install requires cutting side grooves and drilling 3/16" hole.
DRILLING INSTALLATION for Nipple pin :
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit into each nipple pin's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum channel.
Remove the insert to center punch marks and complete the drilling. Use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent sliding.
NOW Refer to the YouTube video for installation. https://youtu.be/VvgMuhgE8TI
TomLuQue@gmail.com
6/5/24 update to add glass filled nylon material
6/18/21 Ver: O'DAY 222 D1 td15.5 pg628B v.200