You must be logged in and verified to contact the designer.
Product Description
This is a pinball tool for those making there own cabinets with 3 x sets of guides to drill your holes into the corners of the cabinet for the pinball leg bolts to pass through. Drilling into a corner is difficult to do successfully freehand but with this jig, it will make it much easier as it allows an easier drill start as well as a guide to pass all the way through.
There are 3 sets of guide holes each 2 1/4" or 57.15mm apart:
- 3.5mm guide hole to drill a 3mm drill or 1/8" drill
- 7mm guide hole to drill a 6.5mm or 1/4" drill
- 10.5mm guide hole to drill a 10mm or 3/8" drill
Due to the solid nylon design, the cost is a bit higher but it will be rigid and solid and just opened the 2 basic materials which are slightly powdery in touch but will be fine for this tool.
Or if you are a member of Shapeways this tool design is available for a free download and print up yourself for personal use.
Note the file is not to be on sold please as it is my original design.