You must be logged in and verified to contact the designer.
Product Description
If you have issues with shreading the insides of your biking shorts because of a narrow stance and mounts that use bolts on the sides, here is a design that works. A single bolt placed on the rear side of the clamp moves it out of the way and prevents scrapping of your inner thighs. This mount is size specific for the Factor OSTRO VAM MY2022 seat posts (It may fit other models or years, contact Factor for details). This mount is not for the Garmin RCT715.
Required Hardware (not included):
1 - M5 X 16 - 18 mm (5 mm x 16/18 mm) socket head cap screw
1- M5 (5 mm) nylon insert lock nut
Suggested installation method
Mark the height of your seat post and remove it from the frame.
Install the mount by inserting from the bottom of the post and sliding it up.
Reinstall the seat post
Move the Varia mount to the desired location and insert an M5 X 12/14/16 mm (5 mm X 12/14/16 mm) socket head cap screw and an M5 (5 mm) nylon insert lock nut in the recesses on both sides of the mount.
Tighten the screw, please do not torque it down tight, it only needs to be as tight as necessary to hold it in place.
Mount the Varia and RIDE!
Note: Please do not try to test fit your device before attaching your mount to your bicycle, it is a tight fit and may not fully seat or be removed as there is not enough leverage without mounting it in it's proper location.
This product is not endoresed by Garmin Ltd or Factor Bikes . All trademarks are owned by their prespective rights holder. No warranties expressed or implied as to fitness for purpose.