You must be logged in and verified to contact the designer.
Product Description
Chassis for the 89 Sabers OWK3 hilts.
For this chassis you will also require the P1 of the design.
This is a removable battery design. The battery tabs required are the type shown in the link below: https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with: -Proffie, GHV3 or Verso (depending on the P1 listing you purchase) -KR Sabers 28mm Bass speaker -18650 Lithium Ion Battery -High Amp kill switch -Shtok Battery and Speaker connector set
This design allows for the board to slide into place once wired up and tested. The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it. If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them. The fixed half on the chassis is designed to be self retained by the thumb screw of the hilt. To access the board, simply undo that screw and carefully lower the fixed chassis. Leave the switch wires long.
The twist and click chassis system is bespoke to Jimmy's Saber Junk and not to be replicated.
Handle with care. Any damage occurred during installation is the responsibility of the individual installer.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: