1/700 German LeKpz M41 90mm GF Light Tank x10
1/700 German LeKpz M41 90mm GF Light Tank x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$17.47
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/700 Scale WW2 German Army LeKpz M41 90mm GF Light Tank.
Contains 10 highly detailed tanks.
Contains:
LeKpz M41 90mm GF Light Tank
German variant of the M41A1 Walker Bulldog U.S. light tank. The changes mainly related to the 76 mm M32 gun, which was re-bored to 90 mm and shortened by 425 mm.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x LeKpz M41 90mm GF Light Tanks
LeKpz M41 90mm GF Light Tank
German variant of the M41A1 Walker Bulldog U.S. light tank. The changes mainly related to the 76 mm M32 gun, which was re-bored to 90 mm and shortened by 425 mm.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
700 LeKpz M41 90mm GF X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
