You must be logged in and verified to contact the designer.
Product Description
Made for a feed slot cut with flat cut ends. Measured 2 3/4" long and 11.88mm wide.
Nipple DRILLING INSTALLATION:
The insert sleeve is symmetrical.
Insert a 1/16" bit into each drill guide hole in the nipple pin and center the insert into the feed slot.
Strike the drill bit end to make a mark in the aluminum of the back web.
Remove the insert to center-punch the location. Use 1/8" drill bit to start with, then use a 3/16" drill bit to finish hole. Hand twist a larger drill bit in the holes to remove any burrs.
The nipple pin will prevent unintentional sliding of the insert.