A Garmin Varia RCT715 seat post mount specifically sized to fit the profile of the MY21+ Dogma F series (non-numbered) bicycles, it does not fit the F# series. It is a base mount adapter and requires the use of the original Garmin RCT715 mount. This adapter replaces the assortment of rubber shims to provide a secure mount direct to your seat post.
Here is a simple description of how to use this base module...
- Remove the two torx screws from the back side of Garmin's supplied RCT715 mount using a T9 torx bit or torx driver. Save these screws as they will be reused. Do not lose them, they are small.
- Separate the back from the front of the Garmin mount and set aside the rear portion, we no longer need this section of the mount.
- Attach the front half of the Mount Adapter onto the back side of the remaining section of the RCT715 mount and secure with the two screws you set aside earlier.
- Attach the newly completed mount onto your saddle with two M-3 (3 mm) x 14 mm socket head socket screws.
- You can use this arrangement exactly like the original Garmin RCT715 mount.
Required Hardware
(not included):
- 2 - M3 (3 mm) x 14 mm socket head cap screws
- 2 - M3 (3 mm) nylon insert lock nuts
This product is not endoresed by Garmin Ltd or CICLI PINARELLO SRL. All trademarks are owned by their prespective rights holder.