This is a set of 2 seats for your Titans Masters or Prime Masters. The Seat is on top of a 5mm peg. There are additional 5mm ports on the sides and back of the seat for additional combination options. Combine with any Transformer with 5mm pegs or ports.
This is sold as a set of 2 pieces connected together. You will need to cut them to separate them and trim off the excess plastic.
Choose Small for a Set of 2
Choose Medium for a Set of 4
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic, Premium Versatile Plastic, Processed Versatile Plastic and PA12.
For Additional Combination Possibilities, I have 5mm Port and Peg adapters.
5mm Circle Port to 5mm Circle Peg Adapter:
https://www.shapeways.com/product/8AHZAPH69/tf-5mm-circle-port-to-circle-peg-adapter?optionId=146734905&li=shops
5mm Hex Port to 5mm Circle Peg Adapter:
https://www.shapeways.com/product/592FMF6MF/tf-5mm-hex-port-to-circle-peg-adapter?optionId=146747621&li=shops
If you like this product, please see my Scorpion Titan City Accessory set
https://www.shapeways.com/product/C5UXZ5ZS9/tf-earthrise-scorpion-titan-city-accessory-set