Modell des Traktors DSB 57 (Die Olsenbande stellt die Weichen) im Maßstab 1:120. Als Antrieb dient ein Tsugawa TU-16A (14054), bei dem die geteilten Achsen von 9 auf 12 mm auseinander gezogen werden. Zusätzlich ist eine elektrische Isolierung sowie Auflage zwischen Antrieb und Fahrwerk nötig sowie ein Decoder, der den 3V-Motor des Antriebs regelbar macht.
Das Modell
https://www.shapeways.com/product/89B7Q4V43/dsb-57-traktor-tt-1-120 besteht aus den 2 Teilen Fahrwerk und Gehäuse, die einfach steckbar sind. Zusätzlich können in die Bohrungen noch die Handläufe und Griffe aus Draht 0,25-0,3 mm sowie die Verschlüsse für die Motorraumklappe 0,15-0,2 mm eingebaut werden.
https://www.danilo-pietzsch.de/Konstruktion_der_DSB_57.htm
Die Versionen in Smoothest Fine Detail Plastic sind preiswerter, aber eigentlich zu leicht für eine ordentliche Zugkraft des Modells, diese Materialien sind auch nicht von mir getestet worden. Ich empfehle die Messing- oder Bronze-Variante mit knapp 24 Gramm Gewicht inklusive Antrieb für ordentliche Zugkraft.
Model of the tractor DSB 57 (The Olsen gang on the tracks) in the scale 1: 120. A Tsugawa TU-16A (14054) serves as the drive, in which the divided axes are pulled apart from 9 to 12 mm. In addition, electrical insulation and a pad between the drive and chassis are required, as well as a decoder that makes the 3V motor of the drive controllable.
The model
https://www.shapeways.com/product/89B7Q4V43/dsb-57-traktor-tt-1-120 consists of the 2 parts chassis and housing, which are simply pluggable. In addition, the handrails and handles made of wire 0.25-0.3 mm and the closures for the engine compartment flap 0.15-0.2 mm can be installed in the holes.
https://www.danilo-pietzsch.de/Construction_locomotive_DSB_57.htm
The versions in the Smoothest Fine Detail Plastic are cheaper, but actually too light for a good traction of the model, these materials have not been tested by me either. I recommend the brass or bronze variant with a weight of just under 24 grams including drive for decent traction.
Model af traktoren DSB 57 (Olsen Banden på sporet) i skalaen 1: 120. En Tsugawa TU-16A (14054) fungerer som drevet, hvor de opdelte akser trækkes fra 9 til 12 mm. Derudover kræves elektrisk isolering og understøttelse mellem drevet og chassiset samt en dekoder, der gør 3V-motoren til drevet kontrollerbar.
Modellen
https://www.shapeways.com/product/89B7Q4V43/dsb-57-traktor-tt-1-120 består af de 2 dele chassis og hus, der simpelthen kan tilsluttes. Derudover kan gelænder og håndtag lavet af tråd 0,25-0,3 mm og lukningerne til motorrumsklappen 0,15-0,2 mm monteres i hullerne.
https://www.danilo-pietzsch.de/Design_af_lokomotivet_DSB_57.htm
Versionerne i Smoothest Fine Detail Plastic er billigere, men faktisk for lette til en god trækkraft af modellen, disse materialer er heller ikke blevet testet af mig. Jeg anbefaler messing- eller bronzevarianten med en vægt på knap 24 gram inklusive drev til anstændig trækkraft.
Isolierung siehe/For insulation see/For isolering se:
https://www.shapeways.com/product/5N8PJXCWG/dsb-57-isolierung-2x-tt-1-120
Einen alternativ anwendbaren Rahmen mit Radsätzen für ein rollfähiges Modell gibt es auch unter/An alternative applicable frame with wheelsets for a rollable model is also available at/En alternativ ramme med hjulophæng til en rullbar model fås også på:
https://www.shapeways.com/product/8Z92QJ3AD/dsb-57-rollrahmen-tt-1-120