Springer pushboat H-Bitt Set of 2, scale: 1/16
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$33.52
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
A Great accessory for the Springer (18" long) pushboat RC model built to about 1/16 scale. Dimensions taken from a real truckable pushboat. (Can be used on other boats as well.)
This is a set of two larger H-Bitts, usually mounted one forward and one aft.
The posts are 3.10 inches (78.74mm) high and 2.25 inches (57.15mm) wide (ends of horizontal post).
Mounted on a small sprue, easy to cut apart.
.195 inch (4.826m) holes in bottom of each post to insert (with epoxy) 3/16 inch steel or brass rods long enough to go into the deck for added strength.
Matches Small H-Bitt set: [Select]
This is a set of two larger H-Bitts, usually mounted one forward and one aft.
The posts are 3.10 inches (78.74mm) high and 2.25 inches (57.15mm) wide (ends of horizontal post).
Mounted on a small sprue, easy to cut apart.
.195 inch (4.826m) holes in bottom of each post to insert (with epoxy) 3/16 inch steel or brass rods long enough to go into the deck for added strength.
Matches Small H-Bitt set: [Select]
Request a custom order
and get this product personalized just for you
Details
What's in the box:
Springer-H-Bit-Set-1@16
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$25.27
