CraftBerg
[Umbra Eagles pattern]
Weaver rail mount for 28mm scale Firearms.
Contains:
16x 4mm Length Rail mounts
22x 5mm Length Rail mounts
1x 11mm Length Rail mount
(
S* = Sprue)
Description
The universal
Umbra Eagles pattern weaver rail mounts are designed for generic models of firearms. Manufactured from 6061 T6 Umbarium and protected by a matte, Type III hard coat anodized finish, these multi-slot bases are compatible with almost any weapon attachment. An integral recoil lug, no slip/strip Torx® screws round out the features of these tactical bases.
(Changing gamerules or stats is up to users)(Does not actually improve your dice rolls)
(Above description text is just fiction)
___________________________________________
Cleaning Information Steps
Parts might need to be cleaned extra when printed in Extreme quality frosted material.
1. Check for damage
2. Remove excess WAX residue from production process
with simple green and a soft brush with warm water.
3. Put the 3d printed product in sunlight to harden/cure for 2-3 hours.
Make sure its not too hot or the resin, or it might deform due to heat. under 30 degrees is fine.
4. Or check out in case of any issues: https://www.shapeways.com/blog/archives/22021-tips-n-tricks-for-painting-miniatures.html
Painting Information- Use water-based acrylic paints meant for miniature plastics is highly recommended.
- Other paints, especially enamels, may not cure if applied DIRECTLY on Frosted Detail 3D-printed plastics.
(But if it has a base coat it works fine.)
- Use dedicated model sprue cutters to remove parts to minimize the risk of damage to the parts.
Be sure to check out the other items in my store!
Buying helps me do this full-time! Support Craftberg!
DISCLAIMER:- This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop.
- Not meant for children 14 years or younger
- These custom designed conversion components will arrive unpainted.