***Note: This bracket is for the original Bolt Pro with fan. If you have the later Bolt Pro fanless receiver (it has ribs) please see the Fanless Bolt Bracket. If you have the new Bolt 300 receiver, please see Bolt 300 Bracket.***
This is a bracket to hold a Teradek Bolt Pro Receiver on the back of a TV Logic VFM-056 or VFM-058 monitor. Requires the use of 4x M3 x 8mm screws to screw into the threaded holes on the back of the monitor. If you already have a battery plate for your monitor, you already have these screws.
You can also screw your existing battery plate onto this Bolt Bracket (so the bracket is sandwiched between the monitor and your battery plate.) You need 4x M3 nuts (they press fit into the ears that stick out) and 4x M3 x 10mm screws to hold the bracket and battery plate together. The photos here show my customized battery plate (also available for sale—see here) attached onto the Bolt Bracket. The customized battery plate has a cutout for a voltage display as well as a cutout for a 2-pin Lemo receptable, to power the Bolt with a short jumper cable. See Battery Plate for more details.
The Bolt Bracket has cutouts for the two HD-SDI ports, the Lemo connector, USB and mini-plug. The antennas in the Bolt receiver are in the top portion of the unit, and they remain clear of obstruction for good signal reception.
The lug on the left side is meant to accommodate the tapping and installation of a 1/4-20 helicoil. This allows you to use a 1/4-20 nylon thumbscrew to lock the Bolt in place.