You must be logged in and verified to contact the designer.
Product Description
This is a power button for Gideon's Ultimate64 main board when installed in a 64c case.
What's different about this button is that it supports the insertion of a 3mm LED. This allows you to put a common LED into the back side of the button. You then simply have to wire that LED to the LED pin header on the board. This will allow you to either set the button to flash as a drive indicator light or illuminate as the power light.
If you use it as the power light, then you could use the factory case LED as the drive indicator light, which would make that LED far more useful! This part slides over the factory pushbutton that's mounted on the board, and fills the opening in the case, giving you a more substantial power button. Simply slide it onto the switch on the board before installing the board in the case. Attach the screws as normal and you're done.
This part was designed on the v1.2 board.
Check out our other Ultimate64 parts (Keyboard brackets, Power Plates, Power Buttons, Userport Cover and mainboard support) in our Shapeways shop.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: