You must be logged in and verified to contact the designer.
Product Description
Rebell 1/72 Razor Mando cockpit with seat Another upgrade for the new 1/72 Rebell Razor model kit.
In this case I've designed the cockpit main console and the Mando's pilot seat, totally screen accurate following precise information sources.
This is a very accurate version of the Mando's cockpit console. But there's more, because it has pre drilled holes for 0.25 mm fiber optics!!! There are more than 70 pre drilled holes!!
Be aware that you will need to clean the holes because there will be wax stuck inside the holes, wax used as a support material of the printed part. And it's really hard to fit the fiber optics strands on the side consoles.
I've included too the cockpit seat, totally screen accurate too, very precise, far better than the stock part.
INSTALLATION: the cockpit fits perfectly on the stock floor, so you don't need to perform any mods. Maybe some slight sanding, that's all. To install the pilot's seat you will need to chop the stock seat mount, and on the stock hole that appear under the part you chopped, you will see a groove that you can enlarge to put my seat upgrade. ATTENTION: this cockpit doesn't fit the stock seat. If you want to keep the stock seat you must cut the seat mount and lower it.
Of course, my Mando pilot fits perfectly on it. You will ne adjust the seat position on the cockpit floor the way that Mando can reach the controls. That's all.
In this product you will receive 2 products: 1 cockpit main console and 1 pilot seat.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: