You must be logged in and verified to contact the designer.
Product Description
Skyrim Dwemer themed Fidget spinner using standard 608 "skate" bearings (8mm x 22mm x 7mm). It uses 12mm balls, Due to the weight of the metal body, balls can be things such as gem spheres, glass marbles etc.
Assembly:
1) Test balls and bearing pressfit into body, see number 2.
2) 3D printing is great but size may vary slightly. Because of this sometimes bearings/balls may be a little too tight. If this happens use "dremel" rotary tool in a circle in holes will usually open up enough. Do a LITTLE at a time and try, too much and things will be too loose.
3) Press in balls. Put a few drops of cyanoacrylate (super glue) on the BALL and let it drip into socket. After dry scrape any excess glue from ball.
4) Insert 22mm x 1.5mm O-ring into groove, press in bearing. If the spinner wobbles press in more in the high areas until straight. (If you used greased and/or rubber sealed bearings it will not spin long. Remove seals and de-grease for best results.)