You must be logged in and verified to contact the designer.
Product Description
Here is my complete front wall REPLACEMENT for the DeAgo Falcon... this assures that the frames are placed precisely where they should be! The back tube is separate for easy painting and a hole in the wall behind the bunk will allow for ease of wire and fiber optics. There are also cutouts for lighting above the tube for adding LEDs. I've attempted to keep it as cheap as possible by printing in ABS, but you can also get it in HD FXD! Hopefully you all enjoy this one. Please let me know what you think!
Included is 2 parts:
1 Wall Replacement
1 Tube Cover
The Tube Cover has tabs to fit into the back of the frames and can only go one way. Enjoy!
PLEASE NOTE: Even thou I have attempted to make the tabs and screw holes to fit in the slots and line up, it has come to my attention that they may not fit some of the other floors that are being sold here on Shapeways by other artists. However, and this is just a suggestion, the tabs can be removed until the entire bottom of the wall is flat and the screw holes can be bypassed by just gluing the walls together and the walls to the floors... just in case you are having a fitment problem.
UPDATE (8-4-16): I have also updated this piece to help with a rear tube fitment problem. I believe because the thickness of the wall, it was causing shrinkage to occur and the slots would be completely out of alignment. I've updated this to hopefully solve that problem. UPDATE (8-8-16): Made some minor cosmetic changes to a few of the greeblies on the frames. Also shortened the first two frames a bit to give them more of a "curve" look.