This is the d3wey Custom FPV Undertray for the DJI Phantom 2. It is a design requested by a user of the 'Black Mamba' 2000mw vTX. Dimensions of the vTX holder are based on website sizes and are, as of 5/11/2014 untested. The tray itself is tested and fits perfectly to the Phantom 2 (and Phantom 1)
The tray is fitted to the Phantom via "4 x M3 25mm Brass Hex Spacers" (not included). They can be sourced from Ebay for about £2 - £3.
The spacers replace the inner screw on each of the Phantom's landing legs. The tray then sits on the spacers and the original M3 leg screws are used to attach the tray to the spacers.
The TX slides into the custom slot and is fixed in place with the supplied door which can either be sealed 2 cable ties
The internal dimensions of the TX holder are:
The Phantom 2 version of the tray is designed to make it possible to remove the Phantom 2 battery still. It is also designed to fit around the old style and new style Zenmuse mounting brackets. I am sure that it will fit around other gimbals too. Dimensions of the space can be submitted on request.
*** - Please Note - *** As with any Shapeways product please be aware of what you are buying. This is a custom designed part not mass produced. It has a slighty rough finish (but nothing that will scratch items). I make every effort to test all my designs but I regret manufacturers do change their products from time to time. If in doubt please contact me.
- d3wey -