Black Natural Versatile Plastic
Kyosho Ultima Andys style Wishbone
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$25.68
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This set of Lower Wishbones is developed for the Kyosho Ultima re-release buggy to increase the front track width to 246mm. The wishbones are 6mm longer (each) then the original Kyosho , and are a direct fit. For fitting a stabilizer you can use any M3 ball stud.
The design is inspired on the famous Andy’s wishbones. The wishbones will improve handling, especially on high grip tracks. The parts were tested on an astro circuit and works very well. The car has more stability in corners as well as on the straight.
For fitting, some minor adjustments may be required. Two sets were tested. The one printed with MJF fitted without any modification, the set printed with SLS had to be slightly drilled from 2.8 till 3mm and required a bit sanding.
For upper arms, "3RAC-TR355" or equivalent can be used.
The design is inspired on the famous Andy’s wishbones. The wishbones will improve handling, especially on high grip tracks. The parts were tested on an astro circuit and works very well. The car has more stability in corners as well as on the straight.
For fitting, some minor adjustments may be required. Two sets were tested. The one printed with MJF fitted without any modification, the set printed with SLS had to be slightly drilled from 2.8 till 3mm and required a bit sanding.
For upper arms, "3RAC-TR355" or equivalent can be used.
Details
What's in the box:
kyosho ultima draagarm
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
