External Render
mini display base regular 5mm grid round
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$29.52
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
A small display base to showcase a figurine character or other small objects of interest. It has a 3mm thick sheet with a grid of 2mm diameter holes on a 5mm center-to-center grid slightly inset from the top of the base. Great for displaying objects or creatures that would benefit from a plug and play base that can keep objects in place.
This part is designed to be able to contain a properly sized cork or equivalent material disk insert in its bottom cavity as a cushioning/anti-skid element. The cork may be held in place using silicone glue if necessary. The cork disk should be approximately 3.875 inches in diameter with a thickness of 0.25 inches. Properly sized cork disk inserts may be acquired from the following source:
http://www.woodturnerscatalog.com/p/54/5252/Turners-Select-Cork-Coaster-Insert
Note that the cork inserts from this source will also be held in place due to the friction of a snug fit, but glue may be used if desired for a more secure fit. If the cork insert fit is extremely tight you can lightly sand the edges to reduce the diameter of the cork prior to insertion. If the fit is very tight the cork may bulge outwards after being inserted but I've found that compressing the assembly between a flat table top and a heavy book overnight will compress the cork after which it will fit well and remain flat when not using any glue.
Display a prized something-or-other or create a small diorama!
This part is designed to be able to contain a properly sized cork or equivalent material disk insert in its bottom cavity as a cushioning/anti-skid element. The cork may be held in place using silicone glue if necessary. The cork disk should be approximately 3.875 inches in diameter with a thickness of 0.25 inches. Properly sized cork disk inserts may be acquired from the following source:
http://www.woodturnerscatalog.com/p/54/5252/Turners-Select-Cork-Coaster-Insert
Note that the cork inserts from this source will also be held in place due to the friction of a snug fit, but glue may be used if desired for a more secure fit. If the cork insert fit is extremely tight you can lightly sand the edges to reduce the diameter of the cork prior to insertion. If the fit is very tight the cork may bulge outwards after being inserted but I've found that compressing the assembly between a flat table top and a heavy book overnight will compress the cork after which it will fit well and remain flat when not using any glue.
Display a prized something-or-other or create a small diorama!
Details
What's in the box:
91vUhfYBn4a-character base regular 5mm grid
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
