1/144 Scale WW2 German Army Rheinmetall-Borsig Waffenträger Tank Destroyer fitted with the 15cm Pak L/29.5 gun. Highly detailed tank with accurate Track detail and moveable Turret
Contains:- 1x Rheinmetall-Borsig Waffenträger 15cm Pak L/29.5 Tank Destroyer
Rheinmetall-Borsig Waffenträger 15cm Pak L/29.5 Tank Destroyer
Developed by the Rheinmetall-Borsig company and designed as a special artillery carrier. The vehicle was designed to carry an artillery system as well as to fire from the chassis. The vehicle utilized the suspension of the Hetzer tank destroyer. Development continued from the end of 1942 through to the middle of 1944. However, the project was discontinued in favor of the Ardelt project because of a complicated design, high cost, and excessive weight.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation