Charging board holders
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$5.99
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This part is optional, only required if the battery charging board is used.
A pair of holders to secure the TC4056 Li-Ion battery 4.2V charging board (you need to remove the onboard micro-USB port) inside the Revanted hilt emitter using the M3 screws that come with the hilt, please see the picture. These holders are used only with a Crystal Chamber chassis setup. Separate the holders from each other before using them by cutting the support bridges. Make sure to insulate the open "+" and "-" pads on the bottom side of the charging board by capton or electrical tape before attaching the board to the metal.
A pair of holders to secure the TC4056 Li-Ion battery 4.2V charging board (you need to remove the onboard micro-USB port) inside the Revanted hilt emitter using the M3 screws that come with the hilt, please see the picture. These holders are used only with a Crystal Chamber chassis setup. Separate the holders from each other before using them by cutting the support bridges. Make sure to insulate the open "+" and "-" pads on the bottom side of the charging board by capton or electrical tape before attaching the board to the metal.
Details
What's in the box:
RVN_Chassis_Charger_Holder
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$16.49
$16.53
$34.65