1/285 (6mm) Italian OF-40 Main Battle Tanks x4
1/285 (6mm) Italian OF-40 Main Battle Tanks x4
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$32.37
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/285 (6mm) Scale Modern Italian OF-40 Main Battle Tanks x4.
Highly detailed Tanks with accurate Track detail and moveable Turrets
Contains:
Italian OF-40 Main Battle Tank
The OF-40 is an Italian main battle tank developed as a joint venture between OTO Melara and Fiat, and intended primarily for export sales. OTO Melara would develop and produce the hulls, and automotive components would be provided by Fiat (the designation of the vehicle comes from the initials of the two companies, whereas "40" refers to the planned mass of the tank). Initial design work was started by OTO Melara in 1977, with the first prototypes ready by 1980.
Superficially, the OF-40 appears very similar to versions of the German Leopard 1 with welded turrets (Leopard 1A3 & 1A4). The OF-40 does share some common components with the Leopard 1, which had also been produced under license by OTO Melara since 1974. The OF-40 follows a conventional modern tank design. The driver is located in the front-right of the hull, with ammunition storage and NBC overpressure system located to the driver's left. The turret is located toward the middle of the tank, with the gunner and commander on the right side of the turret, and the loader on the left.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Highly detailed Tanks with accurate Track detail and moveable Turrets
Contains:
- 4x Italian OF-40 Main Battle Tank
Italian OF-40 Main Battle Tank
The OF-40 is an Italian main battle tank developed as a joint venture between OTO Melara and Fiat, and intended primarily for export sales. OTO Melara would develop and produce the hulls, and automotive components would be provided by Fiat (the designation of the vehicle comes from the initials of the two companies, whereas "40" refers to the planned mass of the tank). Initial design work was started by OTO Melara in 1977, with the first prototypes ready by 1980.
Superficially, the OF-40 appears very similar to versions of the German Leopard 1 with welded turrets (Leopard 1A3 & 1A4). The OF-40 does share some common components with the Leopard 1, which had also been produced under license by OTO Melara since 1974. The OF-40 follows a conventional modern tank design. The driver is located in the front-right of the hull, with ammunition storage and NBC overpressure system located to the driver's left. The turret is located toward the middle of the tank, with the gunner and commander on the right side of the turret, and the loader on the left.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
285 OF-40 Sprue x4.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
