BODY only make sure you buy Door & screen cradle (if you don’t already have one)
Compact single Battery Mod. Takes 18650 batteries and 18mm X 48mm Squonk bottle.
54mm x 25mm x 77mm
Experience of soldering and competence with electrical circuits is required to complete build. For full wiring diagrams consult the Evolv DNA 250c Datasheet - https://downloads.evolvapor.com/dna75color.pdf
Bill of Materials :-
Evolv DNA 75c board - https://www.evolvapor.com/products/dna75color
2 x Keystone 1017 Contacts - https://www.mouser.co.uk/ProductDetail/534-1017-1
3 x M1.7 x 5mm Stainless Steel Countersunk Screws -http://www.modmaker.co.uk/Mod-Making-Supplies/Nuts-Bolts-Screws/M1.7-x-5mm-Stainless-Steel-Countersunk-Screws-Pack-Of-10
1.5mm Silicone Cable - http://www.modmaker.co.uk/Mod-Making-Supplies/Wire-Cable/Black-1.5mm²-Ölflex-Silcone-Cable
510 Micro Squonk Connector (22m x 10mm) - http://www.modmaker.co.uk/MM510-Micro-Spring-Loaded-Squonker-Connector?search=510
Squonk Bottle (up to 18 mm x 48mm) -http://www.modmaker.co.uk/MM-Dinky-Silicone-Squonker-Bottle-Kit-Dark?search=squonk
BUILD NOTES!!!
All mods are designed to have very tight doors at first. Practice taking door on and off multiple times. The Nylon is durable so dont worry about damage. After some time you will get a perfect fitting door!
To remove door. Put fingers in the squonk hole and pull to the right and "roll" off the door. Becomes esier with practice!
Use pliers to flatten contacts to get perfect height with battery. Failure to do this can put pressure on the frame and warp it so the door does not fit properly.
Contacts are 1/2mm thick, you may need to add width to them with a blob of solder or electrical tape on the under side.