Product Description
BODY only make sure you buy Door & 250c screen cradle (if you don’t already have one)
Compact dual Battery Mod. Takes 2 x 18650 batteries and 17.5mm X 48mm Squonk bottle.
55mm x 34mm x 77mm
Extremely narrow allowances for cabling, Experience of soldering and competence with electrical circuits is required to complete build. For full wiring diagrams consult the Evolv DNA 250c Datasheet –
https://downloads.evolvapor.com/dna250color.pdf
Bill of Materials :-
Evolv DNA 250c board -
https://www.evolvapor.com/products/dna250color
4 x Keystone 1017 Contacts -
https://www.mouser.co.uk/ProductDetail/534-1017-1
3 x M1.7 x 5mm Stainless Steel Countersunk Screws -
http://www.modmaker.co.uk/Mod-Making-Supplies/Nuts-Bolts-Screws/M1.7-x-5mm-Stainless-Steel-Countersunk-Screws-Pack-Of-10
1.5mm Silicone Cable - http://www.modmaker.co.uk/Mod-Making-Supplies/Wire-Cable/Black-1.5mm²-Ölflex-Silcone-Cable
510 Micro Squonk Connector (22mm x 10mm) - http://www.modmaker.co.uk/MM510-Micro-Spring-Loaded-Squonker-Connector?search=510
510 Squonk Washer (22mm) - http://www.modmaker.co.uk/MM510-Black-Aluminium-Flat-Washer-22mm?search=washer
Squonk Bottle (up to 17.5 mm x 48mm) - http://www.modmaker.co.uk/MM-Dinky-Silicone-Squonker-Bottle-Kit-Dark?search=squonk
BUILD NOTES!!!
Exposed chip design to reduce printing costs, once completed the batteries will prevent the squonk bottle coming into contact with the DNA chip. Don’t panic!
All mods are designed to have very tight doors at first. Practice taking door on and off multiple times. The Nylon is durable so don’t worry about damage. After some time you will get a perfect fitting door!
To remove door. Put fingers in the Side vents and pull to the right and "roll" off the door. Becomes easier with practice!
Make sure Screen ribbon cable is tucked down under screen cradle so that fire button can actuate.
Use pliers to flatten contacts to get perfect height with battery. Failure to do this can put pressure on the frame and warp it so the door does not fit properly.
Contacts are 1/2 mm thick, you may need to add width to them with a blob of solder or electrical tape on the under side.