Fritz handle 26mmOD 22mmID

This elegant cane kit allows you to create a custom cane. This project cane allows you to have a cane in any color and size.
You can put any design on the cane shaft you wish.

To complete you will need a carbon fiber or other suitable tube:

https://www.amazon.com/gp/product/B07ZRCRPLV/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

and

https://www.amazon.com/gp/product/B00EHXK196/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

NOTE: both pieces can be permanently secured by using epoxy if desired.

1. Dril  hole into wide end of stopper and insert on.
2. Disconnect handle from foot piece.
3. Insert stopperon ribbed section of foot piece. (It should fit securely.)
4. (Optional) Measure from end tube to where the center of the button will be and drill a hole. ~18mm. If you do not wish to drill holes, simply insert the handle and foot into tube and glue in place one you have determined the tube length.
5. Insert cane foot with stopper into end with the hole.
6. Determine total cane height. Note: The best way to determine where to make the final cut is to hold the handle in one hand and, while standing straight, mark the tube at the bottom edge of the wide part of the cane handle.
7. Repeat step # 4 for the cane handle and insert handle when finished.