You must be logged in and verified to contact the designer.
Product Description
1/144 Royal Navy Byers Stockless Anchors 40cwt x2 (Most British Destroyer Classes and similar size vessels). These are highly detailed and accurate Byers Stockless Anchors based on the Norman Ough plans, size references and photographic reference. Available in other scales and other sizes for most different sized Royal Navy vessels.
2x Anchor
Highly detailed and accurate parts, modelled from plans and photographic reference.
Each Anchor comes in 3 parts: Shank, Crown and Swivel Pin.
details include: Securing Bolt, Tripping Palms, Webs, Shackles and name of manufacturer (large scales only)
When assembled the crown will be able to pivot as desired (see renders)
Cleaning Information Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin. Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics. Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts. Please take a look at my other items.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: