Clear Ultra Fine Detail Plastic
1/24 Royal Navy 20mm Oerlikon 60 Round Magazine x4
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$26.11
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/24 Royal Navy 20mm Oerlikon 60 Round Magazines x4. These are highly detailed parts modelled using the John Lambert plans and many reference photographs taken at Priddy's Hard Naval Depot Portsmouth to create the most accurate and detailed 20mm Oerlikon Ammo Magazines available.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 4x Magazines
- Highly detailed and accurate parts, modelled from plans and photographic reference.
- Hex nuts, accurate Rivet placement, 60 Round Ammo Cartridge, Ammunition visible in bottom of Magazine, Accurate Snail Pattern Ventilation Holes
- Parts are hollow to minimise cost
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Tags
1:24 Military WWII Britain 1/24 20mm Oerlikon Gun 1/24 Oerlikon Gun 1/24 Oerlikon MKVIIA 20mm Oerlikon 20mm Oerlikon Ammo 20mm Oerlikon Gun 20mm Oerlikon Magazine 3D Printed Model Parts AA Mounts AA Weapons Anti Aircraft Guns Best Oerlikon Highly Detailed Oerlikon MKVIIA Oerlikon Oerlikon Royal Navy Oerlikon Single OerlikonDetails
What's in the box:
24 20mm Oerlikon 60 Ammo x4 Sprue.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
