DN15 BSP Thread to PET Bottle Top
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.42
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Ever wanted to connect a PET softdrink bottle to standard plumbing fittings ?? This cap screws onto a PET softdrink bottle and has a 15 mm (1/2 inch) female BSP taper (ISO 7) thread. NOTE: a 118 "O" ring is required to get a good seal to the bottle top.
To assemble - clean any dust out of the O ring groove using a wooden matchstick or similar. BEFORE fitting the O ring - pack some grease or petroleum jelly (Vaseline) into the groove - spreading it evenly as much as you can. Press the O ring in using a matchstick and clean out any grease / petroleum jelly that got squeezed out. The plumbing thread can be sealed with a liquid / paste thread sealer (thread tape doesn't work well).
To assemble - clean any dust out of the O ring groove using a wooden matchstick or similar. BEFORE fitting the O ring - pack some grease or petroleum jelly (Vaseline) into the groove - spreading it evenly as much as you can. Press the O ring in using a matchstick and clean out any grease / petroleum jelly that got squeezed out. The plumbing thread can be sealed with a liquid / paste thread sealer (thread tape doesn't work well).
Details
What's in the box:
DN15 BSP Thread to PET Bottle Top
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
